YAMAHA Mounter Feida Corrector YV00II YV100X YV100XG YV100XE YG200
YG200L Calibration Instrument
YAMAHA Mounter Feida Corrector YV00II YV100X YV100XG YV100XE YG200
YG200L Calibration Instrument
We also supply the below products:
| YAMAHA Feida Corrector |
| This product is used to confirm the position of the belt feeder
(Feida) (adsorption position) and special equipment for adjustment.
This product adopts CCD camera and high magnification magnifier to
observe the feeding situation, the up and down movement of the
ejector pin and the wear of the lever through the display, and
reduce the problem of throwing caused by the poor frame, which is
very helpful for improving the placement yield. |
| feature of product: |
| * Simple operation, simple and compact appearance. |
| * With microcomputer control, the feeding speed can be
automatically adjusted, and it can be divided into manual and
automatic feeding modes. |
| * The pneumatic circuit solenoid valve adopts Japanese SMC or
Xiaojinjing to ensure the service life of the control part. |
| * The transmission of X, Y and H directions adopts precision screw
drive. The guide mechanism adopts two sets of precision imported
linear bearings and precision guide columns in each direction to
ensure the precision and reliability of transmission and guidance. |
| * CCD camera with 50mm magnifying glass, with LED lighting to make
the picture clearer. |
| * Pneumatically hit the lever to simulate machine movement. |
| * Observe the dynamic movement of gears. |
| * Equipped with a standard calibration rule to adjust the suction
center. |
| * The overall body is chrome-plated, beautiful and durable. |
|
| FUJI Feida Corrector |
| ◎ product characteristics |
| 1. Adopt precision lens with internal cross frame and stable
conventional display or thin LCD display; |
| 2. The X, Y and Z axes are all adjusted by precision sliders; |
| 3. Dynamically simulate the feeding condition of the rack and
measure and adjust it offline; |
| 4, the air pressure control system, can be manually controlled or
automatically controlled for reclaiming operations; |
| 5. Applicable to all sizes of the same machine, special models,
specifications can be developed and customized. |
$NK-3N NYLON CLIP 2
2 90990-11J003 SCREW, PAN HEAD W/W 13
3 90K41-001450 LABEL,CAUTION 1
4 91312-04006 BOLT HEX,SOCKET HEAD 4
5 91312-04008 BOLT HEX,SOCKET HEAD 14
6 91312-05008 BOLT HEX,SOCKET HEAD 4
7 91312-05010 BOLT HEX,SOCKET HEAD 22
8 91312-06012 BOLT HEX,SOCKET HEAD 4
9 KKE-M111M-00 PLATE,CLAMP 1
10 KLW-M111L-00 BRKT.,POWER SUPPLY 1 1
11 KLW-M1125-00 PLATE,25 1
12 KLW-M1126-00 PLATE,26 1
13 KLW-M1128-00 PLATE,CONV. 1
14 KLW-M112A-00 BASE,BOARD 1
15 KLW-M112B-00 COVER,BOARD 1
16 KLW-M112C-00 PLATE,BAT. 1
17 KLW-M112D-00 HOLDER,BOARD 2
18 KLW-M112E-00 PLATE,BASE 1
19 KLW-M1133-00 STAY, TRANSFORMER 1
20 KLW-M1134-00 BRKT.,TRANS. 1 1
21 KLW-M1136-00 PLATE,SIDE INNER 1 2
22 KLW-M1137-00 PLATE,SIDE INNER 2 1
23 KLW-M1138-00 BRKT.,FAN INSIDE 4
24 KLW-M1139-00 BRKT.,SIDE PLATE 3
25 KLW-M113D-00 PLATE,BASE 5 2
26 KLW-M113F-00 BRKT.,CONNECTOR 2
27 KLW-M113M-00 PLATE,FAN 2
28 KLW-M113N-00 BRKT,DUCT 4
29 KLW-M1336-00 BRKT.,REAR LEFT 1
30 KLW-M1337-00 BRKT.,REAR RIGHT 1
31 KLW-M1338-00 BRKT.,MAIN SWITCH 1
32 KLW-M1339-00 BRKT.,FL 1 YSM20-2
33 KLW-M1339-10 BRKT.,FL 1 YSM20-1
34 KLW-M133A-00 BRKT.,GATE IN OUT 2
35 97602-05310 SCREW PAN HEAD W/WASHER 50
36 98702-03006 SCREW,FLAT HEAD
YAMAHA Feida Corrector
This product is used to confirm the position of the belt feeder
(Feida) (adsorption position) and special equipment for adjustment.
This product adopts CCD camera and high magnification magnifier to
observe the feeding situation, the up and down movement of the
ejector pin and the wear of the lever through the display, and
reduce the problem of throwing caused by the poor frame, which is
very helpful for improving the placement yield.
feature of product:
* Simple operation, simple and compact appearance.
* With microcomputer control, the feeding speed can be
automatically adjusted, and it can be divided into manual and
automatic feeding modes.
* The pneumatic circuit solenoid valve adopts Japanese SMC or
Xiaojinjing to ensure the service life of the control part.
* The transmission of X, Y and H directions adopts precision screw
drive. The guide mechanism adopts two sets of precision imported
linear bearings and precision guide columns in each direction to
ensure the precision and reliability of transmission and guidance.
* CCD camera with 50mm magnifying glass, with LED lighting to make
the picture clearer.
* Pneumatically hit the lever to simulate machine movement.
* Observe the dynamic movement of gears.
* Equipped with a standard calibration rule to adjust the suction
center.
* The overall body is chrome-plated, beautiful and durable.
FUJI Feida Corrector
◎ product characteristics
1. Adopt precision lens with internal cross frame and stable
conventional display or thin LCD display;
2. The X, Y and Z axes are all adjusted by precision sliders;
3. Dynamically simulate the feeding condition of the rack and
measure and adjust it offline;
4, the air pressure control system, can be manually controlled or
automatically controlled for reclaiming operations;
5. Applicable to all sizes of the same machine, special models,
specifications can be developed and customized.
Packaging & Shipping
Packaging details:VACUUM&WOODENBOX
Delivery time:Within 1~3 working days
Shipment:
1. We ship to world wide
2. Most orders ship within 1~7days after payment
3. Item shipped from china mainland using airmail by EMS, UPS, DHL,
TNT or Hong Kong post, we accept the customer’s shipping request
4.100%T/T before shipment OR 30%T/TADVANCE,Banlance 70% before
shipment, after we shipped the goods, we will email you the
shipping information
5.WE sell and buy used equipmentS long-term
Service:
1. SMT FULL LINE SOLUTION
2. SMT PRINTER,PICK AND PLACE MACHINE,REFLOW
OVEN,CONVEYOR,AOI,SPI,LOADER AND UNLOADER SUPPLIER
3. AI INSERT MACHINE, SMT PERIPHERY EQUIPMENT SUPPLIER
4. BUY AND SELL USED EQUIPMENT
5. Manufacuture of SMT FEEDERS AND NOZZLES
6. WE HAVE PROFESSIONAL ENGINEER TEAM
Company Information:
Shenzhen SMTLINE Technology Co., Ltd. was established in June 2005
1.registered capital of 6 million yuan and more than 60 employees.
2.The company's core personnel of the professional R&D team
have 15 years of automated R&D and manufacturing experience.
3.Our company has developed and mass-produced refow oven and wave
welding machine at the end of 2010. The machine is the first in the
country.
4.The sales volume of products reached more than 200 units in half
a year.
5.Our philosophy: integrity, strength first, wholeheartedly for the
customer.
6.Our company adhering to the customer first, service-oriented
business philosophy,
benign competition, will continue to work hard to learn, so that
more customers to use the quality and cheap SMT china high-end
equipment, for customers to save labor costs, factory costs.
Business Scope:
1.Buy and sells SMT pick and place machines(YAMAHA JUKI
FUJI,SAMSUNG,PANASONIC,,SIEMENS,ASSEMBLON,Mirae, SONY,...
2.SMT Full-auto printer&semi-auto printer
3.SMT reflow oven& wave solder machine
4.SMT loader and unloader
5.SMT conveyor
6.AOI, SPI
7.SMT peripheral equipment.
8.Insert machine
9.Machine spare parts such as feeders nozzles
10.Full line solution service
contact:
CNSMT Electronics Equipment Co,.LTD
Ms:Lizzy wong
Email:Lizzy@smtlinemachine.com
cnsmtline@foxmail.com
www.smtlinemachine.com
Mb/whatsapp/wechat:+8613537875415
SKYPE:live:722d83e2b97a0bf5
