| Part Number: KV8-M8860-00X |
| Accessory Name: Cleaning Tube Assembly |
| Uses: Used to clean the inside of the shaft tube (clean once a
month) |
| Applicable to machine model: YV100 & 180 X & Xg Series & YG200 |
|
| Part Number: KV8-M8870-00X |
| Accessories name: Oil syringe (including 10cc VG32 lubricant) |
| Use: After cleaning the shaft strip, refuel with the oil syringe |
| The nozzle of the nozzle holder. |
| Applicable to machine model: YV100 & 180 X & Xg Series & YG200 |
|
| Part Number: KM4-M3810-00X |
| Accessories Name: Steel Needle Assembly |
| Uses: Used to clean the dispensing nozzle |
| Suitable for machine models: YV64D, YV100D, HSD-X, HSD-Xg |
|
| Part Number: KU4-M8590-00X |
| Accessories Name: Light air gun |
| Uses: Air gun used to clean the nozzle |
| Applicable to machine model: Full line series |
|
| Part Number: KV4-M8890-00X |
| Accessories Name: Ultrasonic cleaner |
| Uses: For cleaning nozzles and helical gears |
| Applicable to machine model: Full line series |
|
| Part Number: KM8-M34E0-B1X |
| Accessory Name: Feeder Base Correction Tool |
| Uses: Used to check and correct the feeder base |
| Suction position. |
| Applicable to machine model: |
| YV64, YV100, YV100II, YV100IIe, YVL80 |
| YVL88, YV88X, YV88Xg, YV100X |
| YV180X, YV100XT, YV180Xg, YV100Xg, |
| YV100XTg, YG200 |
|
| Part Number: KM0-M8840-00W |
| Accessories Name: Component Tray |
| Uses: Glass QFP and ceramic component tray |
| Suitable for machine models: from YV series to Xg & YG series |
|
| Part Number: KJ3-MY010-00W |
| Accessory Name: Safety Probe Calibration Tool |
| Use: Safety probe for correcting feeder float |
| Suitable for machine models: from YV series to Xg & YG series |
|
| Part Number: KJ3-MJA00-00X |
| Accessory Name: Tool Component Box |
| Use: Strip parts feeder to replace parts and |
| Tool component for calibration. |
| Suitable for machine models: from YV series to Xg & YG series |
|
| Part Number: KJ3-M34E0-00X |
| Accessory Name: Feeder Suction Position Correction Tool |
| Uses: Calibration tool with monitor for inspection |
| Check and correct the suction position of the feeder.. |
| Suitable for machine models: from YV series to Xg & YG series |
|
| Part Number: KV8-M8885-A00 |
| Part Name: Vacuum Inspection Tool |
| Use: Used to block the vacuum shaft in the middle of the suction
head. |
| In order to check the vacuum in the upper part of the suction head |
| Applicable to machine model: |
| YV100X, 100XT, 180X, YV100Xg, 100XTg, 180Xg |
| YG200 |
|
| Part Number: KV7-M3823-00X |
| Accessories Name: Level |
| Uses: Flat feet for machine leveling |
| Scale: 0.1mm/M |
| Total length: 100mm |
| Applicable to machine model: Full line series |
|
| Accessory Number: 12YMVACGAU |
| Accessories Name: Vacuum Value Tester |
| Use: Used to measure the vacuum value of the Ejector Unit |
| Applicable to machine model: Full line series |
|
| Accessory Number: 12-GGUNSET |
| Accessories Name: Oil Gun |
| Uses: Used in rolling rods and wires that can be oiled with oil
guns |
| On the bearing, used with different nozzles and lubricants. |
| Applicable to machine model: 128-2=Grease nipple correspondence
table |
| Of Information for Customer |
|
| Part Number: K48-M3854-00X |
| Accessories Name: Oil Tsui |
| (Fine type is not sealed, 30 degree bending type) |
| Use: It must be used for bending oil nozzles. |
| Applicable to machine model: 128-2=Grease nipple correspondence
table |
| Of Information for Customer |
|
| Part Number: K48-M3857-00X |
| Part Name: Oil Tsui (Standard Hose Type) |
| Uses: Ball screw that must be used for hose type oil nozzle oiling |
| And linear bearings. |
| Applicable to machine model: 128-2=Grease nipple correspondence
table |
| Of Information for Customer |
|
| Part Number: K48-M3851-10X |
| Accessories Name: LRL Lubricating Grease (50g) |
| Uses: For ball screw and linear bearings. |
| Applicable to machine model: Full line series |
|
| Part Number: KM5-M7122-M00 |
| Accessories Name: Lubricating Grease (White) |
| Uses: For Y-PACKING and O-RING. |
| Applicable to machine model: |
| YV100, YV100II, YV100IIe, YV100X, YV100XT |
| YV180X, YV100Xg, YV100XTg, YV180Xg, YG200 |
|
| Part Number: KV7-M718H-00X |
| Accessories Name: Lubricating Grease (25g) |
| Uses: Specially used for gears on the F-head of the YV88X. |
| Suitable for machine model: YV88X-F, YV88Xg-F |
|
| Part Number: K48-M3856-00X |
| Accessories Name: NSA Lubricating Grease (80g) |
| Uses: Specially used for YV180X & Xg series X-axis ball screw. |
| Suitable for machine model: YV180X & Xg |
|
|
| Accessory Number: 12YMGPACK |
| Accessories Name: Lubricating Oil (400g) |
| Uses: For ball screw and linear bearings. |
| Applicable to machine model: ALL MODEL |
|
|
| Part Number: KV8-M8881-A0X |
| Accessories Name: Cleaning wire fixing handle |
| Use: Recycling and tightening the wire to the handle two |
| End, so to clean the nozzle my pores. |
| Suitable for machine models: from YV series to Xg & YG series |
|
| Part Number: KV8-M8883-A0X |
| Accessories Name: Wire |
| Use: Cooperate with KV8-M8881-A0X |
| Clean the pores of the nozzle. |
| Suitable for machine models: from YV series to Xg & YG series |
|
| Part Number: KV8-M88E3-00X |
| Accessory Name: Unlock the shaft-axis meson (E-RING) tool |
| Use: Used to unlock the YV100X on the FNC shaft |
| Tool for the shaft shaft meson on the cam needle shaft. |
| Applicable to machine model: |
| YV100X-F, 100XT-F, 180X-F, 100Xg-F, 100XTg-F, |
| 180Xg-F, YG200 |
|
| Part Number: KV8-M88E1-00X |
| Accessory Name: A tool that clamps into the town shaft meson
(0.8E-RING). |
| Use: Used to re-clamp the town axis meson |
| YV100X on the FNC shaft on the cam needle wheel. |
| Applicable to machine model: |
| YV100X-F, 100XT-F, 180X-F, YV100Xg-F, 100XTg-F |
| 180Xg-F, YG200 |
|
| Part Number: KV8-M88E2-00X |
| Accessories Name: Metal Guide Wire |
| Use: It is used to guide the cam needle shaft (PIN CAM) |
| Introducing the metal guide wire in the hole of the FNC shaft. |
| Applicable to machine model: |
| YV100X-F, 100XT-F, 180X-F, YV100Xg-F, 100XTg-F |
| 180Xg-F, YG200 |
