KLJ-MC18K-00ZS8MM-72MM Feida Tail Iron Handle
Product Introduction – KLJ-MC18K-00
Rear Metal Pull Handle for Yamaha ZS-Series Feeders (8mm–72mm)
Overview
The KLJ-MC18K-00 is a rear-mounted metal pull handle designed for
Yamaha ZS-series SMT feeders with tape widths ranging from 8mm to
72mm. This robust handle is mounted at the tail end of the feeder
and is used for manual gripping, pulling, and positioning the
feeder during loading or unloading from pick-and-place machines.
Key Features
Compatible with ZS 8mm–72mm feeders
Made of high-strength metal for durability and long-term use
Provides a firm and ergonomic grip for easy handling
Helps with safe removal and insertion of feeders into the machine
OEM part ensures perfect fit and mechanical stability
Applications
This pull handle is installed at the rear (tail) section of Yamaha
ZS-series feeders. It supports operator handling and contributes to
safer and quicker feeder exchanges during SMT production.
Compatible Models
Yamaha ZS Feeders:
KW1-M4500-011 (8mm)
KW1-M4500-015 (12mm)
KW1-M4500-035 (16mm)
KW1-M4500-045 (24mm)
KW1-M4500-055 (32mm)
KW1-M4500-065 (44mm)
KW1-M4500-075 (56mm)
KW1-M4500-085 (72mm)
Related Accessories – KLJ-MC18K-00
(Rear Metal Pull Handle for Yamaha ZS 8–72mm Feeders)
1. ZS Feeder Main Bodies (Compatible with Handle)
The pull handle is mounted to the tail section of the following ZS
feeders:
KW1-M4500-011 — ZS 8mm feeder
KW1-M4500-015 — ZS 12mm feeder
KW1-M4500-035 — ZS 16mm feeder
KW1-M4500-045 — ZS 24mm feeder
KW1-M4500-055 — ZS 32mm feeder
KW1-M4500-065 — ZS 44mm feeder
KW1-M4500-075 — ZS 56mm feeder
KW1-M4500-085 — ZS 72mm feeder
2. Mounting Screws / Fixing Hardware
To install or replace the handle securely:
91312-03004 — M3 mounting screw
KGS-M3696-00 — Spring clip or locking tab (for some versions)
3. Feeder Tail Cover (mounted near the handle)
KLJ-MC56Y-00 / KLJ-MC561-00 — Tail cover for 32–72mm
KLJ-MC26Y-00 / KLJ-MC261-00 — Tail cover for 12–24mm
KLJ-MC46Y-00 — ZS 8mm/24mm tail cover
KLJ-MC1A2-00 — PCB box motor protection cover
4. Feeder Handle (Front Grip)
Used together with the rear pull handle for full feeder grip
support:
KLJ-MC281-00 — Main front handle for ZS feeders
Related Part Numbers – KLJ-MC18K-00
(Rear Metal Pull Handle for ZS-Series Feeders)
Main Handle Part
KLJ-MC18K-00 — Rear metal pull handle for ZS 8mm–72mm feeders
Compatible Feeder Body Part Numbers
These feeders are compatible with the KLJ-MC18K-00 handle:
KW1-M4500-011 — ZS 8mm feeder
KW1-M4500-015 — ZS 12mm feeder
KW1-M4500-035 — ZS 16mm feeder
KW1-M4500-045 — ZS 24mm feeder
KW1-M4500-055 — ZS 32mm feeder
KW1-M4500-065 — ZS 44mm feeder
KW1-M4500-075 — ZS 56mm feeder
KW1-M4500-085 — ZS 72mm feeder
Mounting Accessories
91312-03004 — M3 mounting screw (for fixing handle)
KGS-M3696-00 — Spring lock/clip (if used with the mounting bracket)
Related Components Often Used Together
KLJ-MC56Y-00 / KLJ-MC561-00 — Feeder rear tape guide cover (for
32–72mm)
KLJ-MC281-00 — ZS feeder front handle
KLJ-MC1A2-00 — Motor/PCB box protection cover
FAQ Guide – KLJ-MC18K-00
(Rear Metal Pull Handle for Yamaha ZS 8–72mm SMT Feeders)
1. What is the purpose of the KLJ-MC18K-00 handle?
This rear pull handle allows operators to easily grip, insert, and
remove Yamaha ZS feeders from SMT machines. It provides mechanical
leverage and handling support, especially during frequent feeder
exchanges.
2. Which feeders is it compatible with?
It is designed for Yamaha ZS-series feeders, including:
8mm to 72mm tape width models
Part numbers: KW1-M4500-011 ~ KW1-M4500-085
3. Is this handle necessary for ZS feeder operation?
While not electrically required, it is essential for ergonomic and
safe manual operation, reducing the chance of feeder drop or damage
during handling.
4. How is it installed?
The handle is typically fixed to the rear of the feeder using M3
screws (e.g., 91312-03004). Some versions may also use a locking
spring or clip (e.g., KGS-M3696-00).
5. Is it compatible with older SS or FT feeders?
No. The KLJ-MC18K-00 is specifically designed for Yamaha ZS-series
feeders and is not interchangeable with SS, FT, or other feeder
series.
6. Can the handle be reused on different feeders?
Yes, as long as the feeder is a ZS-series type. The same handle
part number is compatible across 8mm to 72mm ZS models.
7. What material is the KLJ-MC18K-00 made from?
It is constructed from sturdy, corrosion-resistant metal, suitable
for industrial environments and frequent operation.
8. What are signs the handle needs replacement?
Bent or deformed shape
Rust or corrosion (rare but possible)
Loose or stripped mounting points
Cracking or fatigue from repeated force
9. Does replacing the handle affect feeder performance?
No. It is a mechanical support part only. It does not influence
motor, feeding, or calibration functions.
10. Where can I get KLJ-MC18K-00 or its accessories?
Available from Yamaha authorized SMT parts distributors or trusted
third-party suppliers. Always verify part numbers before ordering.
Physical warehouse,
fast delivery
after-sales support
providing door-to-door transportation services
price advantages,
offering a full range of SMT dip equipment and accessories
We can do for you:
1. We provide fulL SMT solution for you
2. We provide core technology with our equipments
3. We provide the most professional tech service
4. We have wealthy experience on SMT factory setup
5. We can solve any question about SMT
Contact:
CNSMT Electronics Equipment Co,.LTD
Email: info@smtlinemachine.com
www.smtlinemachine.com
Mb/whatsapp/wechat:+8613537875415
SKYPE:smtdwx
