FUJI PM23709 NXT PIN,track REFERENCE
Our company has been in operation for 11 years and will definitely be your best choice with guaranteed quality and fast delivery

Product Introduction – FUJI PM23709 NXT Track Reference Pin

The FUJI PM23709 is a track reference pin used in the NXT series SMT machines to assist in precise alignment and positioning of component feeders or conveyor tracks. This mechanical pin acts as a reference locator, helping to ensure accurate installation of feeder units or track elements within the machine’s operational area.

Key Features:

High-Precision Machining: Manufactured to exact tolerances to serve as a consistent physical reference point for track or feeder alignment.
Durable Construction: Made from wear-resistant metal, ensuring long service life even under frequent mechanical contact and feeder changes.
Compact Design: Fits into designated guide holes or reference slots in the feeder base or conveyor rail structure.
Crucial for Repeatable Accuracy: Helps maintain correct placement and spacing of feeders, preventing mechanical misalignment or component pick-up errors.

Application:

Used in FUJI NXT / NXT II / NXT III placement platforms
Mounted on the feeder base, conveyor rail, or track structure
Serves as a mechanical reference point for the alignment of:

Feeder modules
Carrier tapes
Conveyor transport tracks

Part Number:

PM23709

Maintenance Tips:

Inspect regularly for wear, bending, or corrosion
Replace if reference accuracy is compromised
Always clean surrounding surfaces to ensure tight, consistent fitting

Related Accessories – FUJI PM23709 NXT Track Reference Pin

Related Part Numbers – FUJI PM23709 NXT Track Reference Pin

Note: Part numbers may vary by NXT generation (I/II/III) or specific feeder width (e.g., 8mm, 12mm, 24mm). Always consult your FUJI parts manual or supplier for confirmation.

FAQ Guide – FUJI PM23709 NXT PIN, Track Reference

1. What is the FUJI PM23709 Track Reference Pin?

The PM23709 is a precision-machined pin used in FUJI NXT series SMT machines to provide a mechanical reference point for the alignment of feeder modules or conveyor tracks.

2. What is the function of the track reference pin?

Guides the exact positioning of feeders or track rails
Ensures repeatable installation without recalibration
Maintains mechanical alignment accuracy for reliable component placement

3. Which FUJI machines use the PM23709 pin?

It is compatible with:

FUJI NXT, NXT II, and NXT III series machines
Placement modules and conveyor sections where mechanical track alignment is required

4. Where is the pin installed?

Typically:

Inserted into the feeder base plate or track mounting structure
Fits into guide holes or sleeves to serve as a positioning anchor

5. What materials is the PM23709 pin made from?

Made of high-hardness, wear-resistant steel
Surface-finished to prevent rust and wear
Designed for precision fit in tight tolerances

6. Is the reference pin a wear part?

Not typically, but it may require replacement if:

It becomes bent, worn, or corroded
It no longer maintains a tight fit in the base structure
Feeder misalignment or vibration issues are observed

7. How often should it be inspected?

During routine feeder station maintenance
Whenever alignment errors or feeder issues occur
Visual inspection and fit-checking every 3–6 months is recommended

8. Can I replace the pin without realigning the system?

Yes—if installed correctly, the replacement pin will maintain alignment without recalibration, assuming all other hardware is intact.

9. What tools or accessories are needed with this pin?

Guide bushings or sleeves for precise placement
Feeder clamps and locking screws to hold aligned feeders in place
Calibration jigs (if alignment verification is needed)

10. Where can I get genuine PM23709 pins?

You can order from:

Authorized FUJI SMT parts distributors
OEM-approved suppliers
FUJI’s official parts and service network

pcb magazine loader,pcb loader,smt loader,pcb loader machine,bare board loader,pcb loader unloader,pcb magazine unloader,smt conveyor,pcb inspection conveyor,pcb conveyor,pcb magazine,pcb magazine rack,smt magazine rack,magazine pcb,smt magazine,smd magazine,pcb storage racks,pcb container,ESD storage racks,esd pcb racks,smd counter machine,reel counter machine,component counting machine,smd component counter ,smd parts counter ,nozzle cleaning machine

We can do for you:
1. We provide fulL SMT solution for you
2. We provide core technology with our equipments
3. We provide the most professional tech service
4. We have wealthy experience on SMT factory setup
5. We can solve any question about SMT

Contact:
CNSMT Electronics Equipment Co,.LTD
Email: info@smtlinemachine.com
www.smtlinemachine.com
Mb/whatsapp/wechat:+8613537875415
SKYPE:smtdwx

CNSMT  was established in June 2005

with a registered capital of 6 million yuan and more than 60 employees.

The company's core personnel of the professional R&D team have 15 years of automated R&D and manufacturing experience.
CNSMT mainly develops and sells SMT pick and place machines, printing presses, reflow welding, wave solder machine, loader and unloader, conveyor, AOI, SPI, and peripheral auxiliary equipment.

The company has developed and mass-produced refow oven and wave welding machine at the end of 2010. The machine is the first in the country.

The sales volume of products reached more than 200 units in half a year.
Our philosophy: integrity, strength first, wholeheartedly for the customer.

Our company adhering to the customer first, service-oriented business philosophy,

benign competition, will continue to work hard to learn, so that more customers to use the quality and cheap SMT china high-end equipment, for customers to save labor costs, factory costs.