FUJIXB03330 H12HSH08H04 working head solenoid valve

Our company has been in operation for 11 years and will definitely be your best choice with guaranteed quality and fast delivery

FUJI XB03330 Solenoid Valve – For H12HS / H08 / H04 Working Heads

Product Overview

The FUJI XB03330 is an original solenoid valve specifically designed for the NXT series working heads, including H12HS, H08, and H04. It is a key pneumatic control component responsible for managing vacuum switching, suction, and release of components during the pick-and-place process.

Key Features
Enables vacuum ON/OFF control within the working head Millisecond-level fast response for high-speed placement Fully compatible with FUJI H12HS, H08, and H04 heads Long-life design with durable sealing and coil Original FUJI part with standard mounting and quick-connect ports

Applications

Used in FUJI NXT-series SMT machines
Controls nozzle suction, blow-off, and vacuum release
Works with vacuum sensors and pressure regulators for closed-loop control
Installed inside the working head near the nozzle or vacuum manifold

Technical Specifications (Typical)

Included in Package

1 × XB03330 Solenoid Valve (with coil)
FUJI original label and part ID
Mounting screws may vary by head model (check manual or BOM)
Product Benefits

The FUJI XB03330 Solenoid Valve is essential for ensuring stable component pickup and precise placement in high-speed SMT operations. Its reliability, compact size, and compatibility with multiple head types make it a preferred replacement part for maintenance and repair of NXT heads.

Related Accessories – FUJI XB03330 Solenoid Valve

Head Type Compatibility (Cross-Reference)

> Always match solenoid specs to head model and firmware settings to ensure proper operation.

FUJI XB03330 Solenoid Valve – Related Part Numbers

Alternative / Cross-Compatible Parts (Check before use)

Notes:

The XB03330 valve is specifically tuned for use inside FUJI NXT working heads; substitutes should match voltage, port size, and actuation speed.
Always confirm compatibility based on machine series, head type, and pneumatic system configuration.

FAQ Guide – FUJI XB03330 H12HS / H08 / H04 Working Head Solenoid Valve

General Information

Q1:What is the FUJI XB03330 Solenoid Valve used for?

A:
TheXB03330 is a high-speed solenoid valve installed inFUJI NXT working heads (H12HS, H08, H04). It controlsvacuum switching, enabling the nozzle topick up or release components by rapidly turning air suction on or off.

Q2:Which FUJI heads use this valve?

A:
The XB03330 is commonly used in:

H12HS – 12-nozzle high-speed head
H08 – 8-nozzle standard head
H04 – 4-nozzle precision head
The number of solenoids per head varies depending on nozzle configuration.

Functionality & Operation

Q3:What does the valve control exactly?

A:
It regulates compressed air to control:

Vacuum activation (for component pick-up)
Vacuum release / blow-off (to place or discard components)
Air channel switching for different nozzle actions

Q4:How fast does the XB03330 respond?

A:
Response time is typically≤ 10 milliseconds, allowing fast pick-and-place cycles at high machine throughput (20,000+ CPH depending on head type).

Q5:Can I use third-party solenoid valves as replacements?

A:
Not recommended. While some industrial solenoid valves may fit physically (e.g., from SMC or CKD), they oftendo not meet FUJI’s exact voltage, flow, timing, or mounting requirements. Use only FUJI-certified parts for best performance and machine safety.

Installation & Maintenance

Q6:Where is the XB03330 installed?

A:
Inside theNXT working head, typically mounted on or near thepneumatic manifold. It is connected viapush-in air fittings and anelectrical cable (e.g., XH01400).

Q7:Do I need to calibrate the head after valve replacement?

A:
No calibration is usually needed, but it is recommended to:

Run avacuum check for all nozzles
Verifycomponent pick-up accuracy
Ensure valve response and airflow are stable

Q8:What is the expected service life?

A:
The XB03330 is rated for10 million+ cycles under normal SMT operating conditions. Replace it if:

Vacuum performance is inconsistent
Response time increases
Internal coil or spring fails

Troubleshooting

Related Parts

Best Practices

Useclean, dry, oil-free air to avoid valve contamination
Avoid bending or kinking air tubes connected to the valve
Always replace valves withoriginal FUJI parts
Inspect valves during scheduled head maintenance intervals

Summary

TheFUJI XB03330 solenoid valve is a critical component in the NXT head's pneumatic system, ensuring high-speed and precise component handling. Regular inspection and proper replacement will maintain machine reliability and placement quality.

pcb magazine loader,pcb loader,smt loader,pcb loader machine,bare board loader,pcb loader unloader,pcb magazine unloader,smt conveyor,pcb inspection conveyor,pcb conveyor,pcb magazine,pcb magazine rack,smt magazine rack,magazine pcb,smt magazine,smd magazine,pcb storage racks,pcb container,ESD storage racks,esd pcb racks,smd counter machine,reel counter machine,component counting machine,smd component counter ,smd parts counter ,nozzle cleaning machine

We can do for you:
1. We provide fulL SMT solution for you
2. We provide core technology with our equipments
3. We provide the most professional tech service
4. We have wealthy experience on SMT factory setup
5. We can solve any question about SMT

Contact:
CNSMT Electronics Equipment Co,.LTD
Email: info@smtlinemachine.com
www.smtlinemachine.com
Mb/whatsapp/wechat:+8613537875415
SKYPE:smtdwx

CNSMT  was established in June 2005

with a registered capital of 6 million yuan and more than 60 employees.

The company's core personnel of the professional R&D team have 15 years of automated R&D and manufacturing experience.
CNSMT mainly develops and sells SMT pick and place machines, printing presses, reflow welding, wave solder machine, loader and unloader, conveyor, AOI, SPI, and peripheral auxiliary equipment.

The company has developed and mass-produced refow oven and wave welding machine at the end of 2010. The machine is the first in the country.

The sales volume of products reached more than 200 units in half a year.
Our philosophy: integrity, strength first, wholeheartedly for the customer.

Our company adhering to the customer first, service-oriented business philosophy,

benign competition, will continue to work hard to learn, so that more customers to use the quality and cheap SMT china high-end equipment, for customers to save labor costs, factory costs.